Bathroom & Shower Tile

Bathroom Tile Installation in Arlington, VA

Showers, tub surrounds and bathroom floors tiled over a properly waterproofed, flat substrate, so the tile you picked looks right and stays put.

  • Licensed & insured Virginia contractor
  • Free in-home estimate, written scope
  • 5-year workmanship warranty

Get a Free Estimate

Tell us about your project. It takes about a minute.

What do you need help with?
A few details
When would you like to start?
Where should we send your estimate?

No obligation. We never sell your information. Privacy

Licensed & Insured

Virginia contractor, fully insured for work in your home.

10+ Years of Experience

Hands-on in construction, tile installation and flooring. Estimates are free.

Waterproofed & Flood Tested

Every shower we build is sealed and tested before tile goes on.

5-Year Workmanship Warranty

Our installation is covered by a 5-year written warranty.

Tile is the hardest-working finish in your house, and the bathroom is where it gets tested. Water hits it every day. Steam gets behind anything that is not sealed. A floor that flexes cracks grout within a year. That is why the part of a tile job you never see matters more than the part you do.

Nova Tiling Pros installs bathroom tile across Arlington and Northern Virginia with that in mind. We prep the substrate, waterproof it, lay out the pattern with you before we start, and set the tile with the mortar coverage the manufacturer and industry standards call for. You get a bathroom that looks sharp on day one and still looks sharp years later.

Shower stall fully waterproofed with sealed foam board, niche and sloped pan before tile

What We Tile in a Bathroom

Most projects combine two or three of these, and we price them together so you are not juggling separate crews.

A full shower tile installation covers walls, floor, curb and ceiling if you want it. If you are keeping the tub, a tub surround refresh replaces failing wall tile and the rotten board behind it. Underfoot, bathroom floor tile goes down over a flat, stiff subfloor with the right underlayment.

The details are where a shower earns its keep: a properly built shower pan, full shower waterproofing, and built-in niches and benches framed and sealed before tile. Want no step at all? We build curbless showers with the floor recessed and sloped to a linear drain.

How We Keep Water Where It Belongs

Tile and grout are not waterproof. Water passes through grout joints into whatever is behind them, which is why so many older showers in Arlington have soft walls and stained ceilings below.

We build every shower as a sealed system. That means a waterproof membrane or foam board across all walls, pre-formed or site-built inside and outside corners, a sloped pan tied into the drain, and sealed penetrations at the valve and shower head. Before tile goes on, the pan is flood tested: we plug the drain, fill it, mark the water line and check it again later. If the level has not dropped, we tile.

Bathroom Tile for Arlington Homes and Condos

The housing here is mixed, and each type has its own quirks. Pre-war colonials and Cape Cods in neighborhoods like Lyon Village and Cherrydale often have thick mortar-bed tile over wire lath, cast iron tubs and floors that are far from level. High-rise condos along the Rosslyn-Ballston corridor and in Crystal City come with association rules on work hours, elevator bookings, water shut-offs and noise.

We have a plan for both. In older homes we check framing and subfloor before quoting so there are fewer surprises once the old tile is out. In condos we coordinate with building management, protect common areas and schedule deliveries around the loading dock. See how we work in your area on our service areas page.

Why Homeowners Choose Nova for Bathroom Tile

Tile is our trade, not a side line. When you hire us, the people who measure your bathroom are the people who understand how it gets built.

  • Licensed and insured Virginia contractor
  • Free in-home estimate with a written, itemized scope
  • Waterproofing and flood testing on every shower we build
  • Layout reviewed with you before the first tile is set
  • 5-year written workmanship warranty on our installation
  • Dust control, floor protection and a clean site every day

Looking for a trusted tile contractor in Arlington, VA? We handle every part of a tile project, from demolition to the final bead of caulk.

Our process

How It Works

A clear process, a written scope and one crew from start to finish.

  1. 01

    Free in-home estimate

    We visit, measure and look at what is behind and under the surface. You get straight answers about what the job involves.

  2. 02

    Written scope & schedule

    An itemized estimate shows what is included, what it costs and how long it will take. No vague allowances.

  3. 03

    Prep, waterproof, tile

    We protect your home, prepare the substrate properly and set your tile to the layout you approved.

  4. 04

    Walkthrough & warranty

    We go over the finished work with you, fix anything on the list and back our installation with a 5-year warranty.

FAQ

Bathroom Tile Installation FAQs

How long does bathroom tile installation take?

A tub surround or shower walls usually take three to five working days including demolition, waterproofing, tile and grout. A full bathroom with floor and shower typically runs one to two weeks. Cure times for waterproofing, mortar and grout set the pace, and we will give you a day-by-day schedule with your estimate.

Do I need to buy the tile before you give me a quote?

No. We can quote from measurements and a general idea of what you want, then tighten the number once you choose. Tile size, material and pattern all affect labor, so it helps to bring us in before you order. We can tell you how much to buy, including the right overage for your layout.

Can you tile over my existing bathroom tile?

Sometimes on floors, if the old tile is solidly bonded, flat and the added height works at the door and toilet. In showers and tub surrounds we almost always remove the old tile, because the only way to know the waterproofing is sound is to rebuild it.

What tile works best in a shower?

Porcelain is the workhorse: dense, low-absorption and available in every look. Ceramic is fine on walls. Natural stone such as marble is beautiful but needs sealing and gentler cleaners. On shower floors, smaller tile or mosaics follow the slope better and give more grip underfoot.

Do you handle the plumbing when you tile a shower?

Yes. Because we also do full bathroom remodeling, we can replace the shower valve, move a drain or swap a tub while the walls are open, and pull permits where the work requires them.

Free in-home estimate

Get Your Bathroom Tile Installation Estimate

Tell us what you have in mind. We will come out, measure and give you a written estimate at no cost.

  • No cost and no obligation
  • Written, itemized scope
  • Serving Arlington and Northern Virginia & the DC area

Prefer to talk it through?

(571) 579-4860

Request Your Free Estimate

Tell us about your project. It takes about a minute.

What do you need help with?
A few details
When would you like to start?
Where should we send your estimate?

No obligation. We never sell your information. Privacy

Call Now Free Estimate